|
|
|
|
|
| |||||||||||
The information here is specific to 12V solar panels or similar small voltage photovoltaic panels, not for large solar power generators that can power your home. If this is what you're looking for, read on... Step 1 - Source for solar cells You can purchase new solar cells, salvage used or broken ones or you can even make them at home. If you intend to use your solar panels for a considerable length of time, you'll be better off buying new solar cells. This is the most expensive option. Yet new solar cells are more effective and have a longer lifespan. In the long run, buying new cells can likely be cheaper than the other options. Used or broken photovoltaic cells can be used. But you may have to replace them after a few years because they'll be worn out. Yet if you want to make a solar panel just for fun, used or broken solar cells will be great. They will definitely not be the most professional looking solar energy panels around, but who cares, you're just having fun! You can even make your own solar cell by heating up copper plates to form cuprous oxide, which is a form of semiconductor. But these homemade solar cells are inefficient at best and only produce microwatts of power per cell. Step 2 - Soldering the solar cells Soldering twenty-four photovoltaic cells in series gives us a 12V solar energy supply. This assumes each solar cell produces 0.5V. However there are some solar cells that are not rated at 0.5V, so it'll be good for you to check the specifications before purchasing. The 12 volt supply is just part of the equation. You'll also need to consider the output current. Only with the correct voltage and sufficient current can we have enough power to drive the application of your choice. Step 3 - Pasting solar cells onto a substrate After you join the solar cells electrically, you'll have to paste them onto a substrate. Many hobbyists prefer to use silicone caulk. But if you're a beginner, you'll need to learn the correct technique to do so. Otherwise the cells may be strained after only a short period of use. Step 4 - Putting them into a protective box After the photovoltaic cells are fixed onto the substrate, you'll have to make a box to hold the substrate. Wood, plastic or metal can be used -- each has its unique characteristics. I personally prefer to construct the protective box last. This is because we can be flexible to change our solar panel design halfway if we need to, without the limitation of the already-prepared box. For larger solar panels, you'll be better off making the box first. After the box is completed, you can hold the substrate in the box using blobs of silicone caulk. Step 5 -- Cover the solar panel box The final step consists of covering your protective box with a transparent plastic or glass. This prevents dew and precipitation from damaging your photovoltaic cells. This is the only part of the solar panel that needs maintenance -- wiping the outer surface with a soft, damp cloth. After completing these 5 steps, your 12V solar panel is ready to produce electricity for you.
Article Source: http://www.bharatbhasha.net Article Url: http://www.bharatbhasha.net/family.php/183842 Article Added on Saturday, November 7, 2009 LD
| |||||||||||
|
| |||||||||||
| family >> Top 50 Articles on Family | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Category - > | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
